Product Description:

Dehydration dryer is the most economical of a fast drying machine. Operation is very simple and practical; for small pieces of hardware dry, dehydration, oil, such as electroplating parts, watches and clocks, tableware, spring, screws, plastics, electronics and so on.

First, the function of dehydration dryer:

  1, dehydration, drying simultaneously, no water stains and stains, to avoid the workpiece oxidation or rust.

  2, dehydration tank for the stainless steel, durable, within the basket can be raised to facilitate the work of loading.

  3, set the foot brake, improve the use of security.

  4, the use of automatic control of the power system, dehydration drying or open the aluminum cover, the automatic cut off the power.

Second, use:

1, check the machine power connection, the fixed position of the drum is correct.

2, open the cover, in the drum into the workpiece.

3, close the lid, start the drum switch and heat switch for dehydration drying.

4, dehydration drying, the first turn off the drum switch and heating switch, and then foot brake plate, so that the drum completely stopped.

5, open the lid, put the drum, pour the workpiece.

Third, note:

1, before use, let the drum idling run, check the direction of rotation with the shell of the internal indicator arrows show the same, electric wire row

2, when loading the workpiece, to make the workpiece evenly distributed in the drum, the amount of workpiece depending on the size of the workpiece, generally not more than 1/2 to the best.

3, with the foot brake plate, be sure to make the drum switch handle off the situation.

4, the dehydration machine can not be heated separately dry centrifugal drying, but can not shut down the motor alone heating to dry.

5, should always check, maintenance, regular to the bearing to add high-quality lubricants, to maintain good performance of dehydration machine.

Four: dehydration dryer technical parameters: